ROTALIGN smart EX

The ultimate intrinsically safe alignment system

ROTALIGN smart EX - The ultimate intrinsically safe alignment system

The high-end laser alignment system for ATEX/EX keeps its promises under any conditions

 

  • System and case fully certified for potentially explosive areas.
  • Alignment of all types of rotating machines and shafts.
  • Hundreds of positions are automatically measured during shaft rotation (SWEEP).
  • Pass Mode for convenient alignment of uncoupled shafts.
  • Only one measurement required for full machine adjustments: Live monitoring of horizontal and vertical corrections at any angular sensor position on the shaft (Concurrent Live Move).
  • Save PDF reports directly to USB memory stick: no PC required.
  • Wireless data transfer using the ATEX/IECEx certified Bluetooth module (optional)

 

 

 

Need help?

Our support team is pleased
to assist you.

Contactform

ROTALIGN smart EX is the ultimate laser shaft alignment system designed for the use in potentially explosive atmospheres in accordance with ATEX and IECEx regulations

ROTALIGN smart EX is the ultimate laser shaft alignment system designed for use in potentially explosive atmospheres in accordance with ATEX and IECEx regulations.
The system is fully packed with powerful capabilities. With Concurrent Live Move, only one measurement is required to perform the required machine adjustments: no matter the position of the sensor on the shaft, Live Move enables to concurrently monitor the vertical and horizontal machine corrections live on the screen. This is extremely useful in case of restricted access to predefined shaft positions.
ROTALIGN smart EX is delivered in a robust and valuable light-aluminum case which is suitable for hazardous areas.
PDF reports can be generated and directly saved from the system onto a USB stick.

The optional wireless Bluetooth module is certified ATEX/IECEx. It allows wireless data transmission from the sensor to the computer. This is a unique capability of PRÜFTECHNIK alignment systems for hazardous areas.


PDF reports can be generated and directly saved from the system onto a USB stick. In addition the PC software ALIGNMENT CENTER can optionally be used for preparing, analysing, archiving measurement files and printing professional reports.

OPTALIGN smart EX

 

OPTALIGN smart Firmware 3.00

This upgrade contains:
OPTALIGN smart Firmware version 3.00
Shaft Alignment version 3.00
Straightness version 3.00

 

Note: OPTALIGN smart firmware 3.00 incorporates both the computer firmware
3.00 and OPTALIGN smart sensor firmware 1.42.

 

How to Upgrade computer firmware

OPTALIGN smart EX - ALI 12.200 EX computer upgrade procedure

1. Extract executable file to empty PRUFTECHNIK USB memory stick. Firmware will be stored in the OPTALIGN folder.
2. Attach OPTALIGN smart EX to ALI 12.500 OPTALIGN smart adapter box.
3. Insert PRUFTECHNIK memory stick into the adapter box.
4. Switch on OPTALIGN smart EX. Update will autostart. 


Please ensure that battery capacity is at least 50% or that the ALI 12.500 adapter box is connected to ALI 12.651 mains adapter/charger.


NOTE: When the OPTALIGN smart EX is running, the USB Stick will NOT be recognised!
Update is only possible if the USB Stick is first connected to the adapter box and OPTALIGN smart EX is then booting up.