VIBXPERT II

The Expert in data collection, vibration analysis and field balancing

VIBXPERT II - The Expert in data collection, vibration analysis and field balancing

VIBXPERT II is an all-in-one data collector, vibration analyzer and field balancer based on latest technology.

 

  • Fastest measurements using trending spectra
  • User-friendly and intuitive operation
  • Powerful analysis and diagnostic tools for machine trouble shooting
  • Automatic switchbox support
  • Long-lived battery

Need help?

Our support team is pleased
to assist you.

Contactform

Most of the abnormal vibrations on rotating equipment are caused by unbalance, misalignment, defective bearings, gear damage or looseness

Most of the abnormal vibrations on rotating equipment are caused by unbalance, misalignment, defective bearings, gear damage or looseness. These defects may occur at short intervals. In-depth analysis allows identifying the root cause of such recurring defects.

Useful analysis tools are e.g. resonance tests, bump testing, modal analysis, ODS analysis, cross channel phase, orbit measurements, high resolution spectra analysis, long time wave recording and shaft centerline plots.

 

VIBXPERT II offers all these powerful analysis tools in one user friendly system. VIBXPERT II has a modular structure that allows you to upgrade the device at any time from a basic package for fast route-based data collection to a full-blown 2 channel analyzer with advanced analysis functionalities.

Besides the high-end analysis measurements capabilities, field balancing options and route data collection functionalities, VIBXPERT II also offers a special machine template mode which is typically used to perform acceptance measurements of newly produced or installed rotating equipment such as fans, pumps, electric motors or generators. The machine templates includes all relevant machine information such as RPM, roller bearing defect frequencies, warning and alarm thresholds, which allow you to provide a standardized, fast and easy acceptance inspection.

As with all our data collectors and vibration analyzers, you will benefit from free software and firmware updates, and low ownership cost.

VIBXPERT II update
version 3.22 build 796

 

What's new in VIBXPERT II firmware version 3.22?

  • Coastdown: + Timesynchronous averaging improved.
  • Language support: + Swedish language updated

Notes

  • The VIBXPERT update tool is used to load the VIBXPERT II firmware into the instrument. Please refer to the README file for further information on requirements, changes, etc.

  • In order to install the latest firmware proceed as follows:
    1. Download the VIBXPERT II firmware file on your PC.
    2. Unpack the file and run the VIBXPERT Update tool. Please use the latest VIBXPERT UpdateTool.
    3. Follow the instructions on the screen.

VIBXPERT
smart tools

 

Notes

  • The VIBXPERT utility software is used for data transfer between the instrument and a PC. Please refer to the README file for further information on requirements, changes, etc.
  • The VIBXPERT Client software is used to demonstrate the operation of the VIBXPERT instrument on a PC or Laptop.
Working principle of a manual switchbox
Working principle of a manual switchbox
Automatic switchbox connected to a data collector. Several switchboxes can be connected in series.
Automatic switchbox connected to a data collector. Several switchboxes can be connected in series.
Integration into intrinsically safe areas.
Integration into intrinsically safe areas.

Automatic Switchbox

 

High-quality data is critical to the success of your reliability-based maintenance program (RbM).
However, many factors can significantly impact data quality.

Vibration readings of route-based data collection must be measured at exactly the same location every time.
Measurements have to be performed quickly in order to save time and even untrained staff may have to collect data.
Last but not least, how can you make hard-to-reach measurement locations part of your RbM program
without exposing employees to safety hazards during data collection?

PRÜFTECHNIK’s Automatic Switchbox for VIBXPERT II is exactly the right solution to these issues.
Compared to a standard switchbox whereby operators still may mix up measurement channels
as they have to manually “turn the knob”, the proven Automatic Switchbox solution rules out human errors.

PRÜFTECHNIK’s unique concept guarantees:

  • Maximum reliability of vibration data
  • Maximum efficiency – never has routine data collection been this short
  • Maximum security for operators
  • Maximum coverage - unlimited cable length with PRÜFTECHNIK’s unique sensor concept*

 

Many customers have understood the advantages of Automatic Switchboxes and have taken their RbM program to the next level.
If you too are ready to take the next step, contact us for more details.

 

 

 

Take advantage of the latest condition monitoring technology.

Make way for new technology and do not wait to
become a VIBXPERT

DROP your current vibration measuring device and TRADE-IT-IN at a special price for our powerful & proven vibration analyzer VIBXPERT II. Just leave your vibration analyzer1 with us and take home your new VIBXPERT II.

Take advantage of the latest condition monitoring technology.

VIBXPERT II improves vibration data collection and signal analyzing significantly and is perfectly designed to suit the needs of both vibration specialists and beginners.

Are you ready to become a VIBXPERT? - Request information now

 

The package includes: 

  • VIBXPERT II device, sensors & cables
  • Long-lived with a long battery life and a large data memory
  • Carrying bag, detailed user manual
  • Portable shock-proof case
  • Attractive Software package (OMNITREND, Full version, Free of charge updates on software and firmware)
  • Fast thanks to optimized measuring workflows (trending spectrum) and advanced processor technology
  • Powerful due to many advanced analysis functions and measuring templates
  • Easy to use: Intuitive to operate on its graphical user interface and effective use of color
  • Other advanced features available (phase, cost down, bump test, ODS, modal analysis) – upgradable at any time
  • High quality color display technology with low energy consumption (Full VGA)
  • Ergonomically designed

 
Not valid for Germany & Austria
1) Any fully functional 3rd party two-channel FFT portable vibration analyzer
    or VIBSCANNER (NON EX).