- Products and Services
- Condition Monitoring Systems
- Vibration Analysis and Balancing
- Vibration Analyzer
- VIBSCANNER EX
Vibration analysis system for hazardous environments
Approved for ATEX Zone 1
Intuitive one-hand operation with joystick
Integrated sensors with explosion protection for vibration, speed and temperature measurements
Vibration analysis: FFT spectrum, time signal analysis and recording
Shockproof, waterproof housing according to IP65 standard
Compatible with VIBCODE transducers with automatic measuring point recognition
Optional: Operational balancing
Find out more …
Machine vibration data acquisition with ATEX protection
Especially in industries such as petrochemicals or Oil & Gas, it is critical to prevent unplanned shutdowns and machine failures as it may cause extensive damage due to the explosive nature of these environments.
From data collection, vibration analysis through to machine troubleshooting, VIBSCANNER EX is the all-rounder handheld data collector and vibration analyzer for hazardous environments. Its ATEX zone 1 rating allows you to take advantage of the versatile functionalities of the proven VIBSCANNER in explosive environmental conditions.
With OMNITREND software, the universal PRUFTECHNIK Condition Monitoring software platform, measurements can be stored and analyzed. Diagnosis reports can be generated, measurement tasks can be pre-configured and uploaded to the device for route-based data collection.
As with all our data collectors and vibration analyzers, you will benefit from free software and firmware updates, and low ownership cost.
Download more information for free
PRUFTECHNIK Condition Monitoring | Machine and plant monitoring
VIB 5.400 EX VIBSCANNER with accumulator type | VIB 5.425 EX 3.Supplement
Certificate | EX
VIB 5.400 EX | 5.425 EX VIBSCANNER EX and VIBSCANNER rechargeable battery EX
Declaration of conformity | CE
VIB 5.430 USB Serial to USB cable adapter for VIBSCANNER EX
Declaration of conformity | CE
What is new?
VIBSCANNER Firmware Version 2.02 build 350
Crest factor is an additional result in the result display of overall vibration measurements.
File manager: Selects either the uppermost folder or the uppermost file in the tree view when the file manager is opened.
Max. values for balancing weight (99 kg), balancing radius (50 m) and number of fixed locations (360) increased.
Default trigger reference edge is the 'outgoing' signal edge.
Battery icon can be hidden in the status line in order to display long machine names, etc.
The Meas. Setup name, the corresponding OMNITREND Setup ID no. and the setup parameters are shown in the Route Setup screen.
Show statistical data about the current route, e.g. last measured, no. of trains in route, etc.
The path to the measurement location can be displayed in the Task selection screen.
Order of measurement task can be changed as required (as of OMNITREND version 2.32).
Manual input of RPM values.
New Route Setup menu.
Measurement quantity (a,v,d) can be shown in the measurement icons for spectrum and time waveform.
Module ‘FFT’ and ‘Signal analysis’:
New selection screen for user-defined spectrum and time waveform measurements.
AC current, AC voltage and ICP sensor selectable.
FFT spectrum: RMS or 0-peak for meas. quantity selectable
How to install the latest firmware update?
Download the firmware file.
Run the downloaded EXE file.
Be sure to use the latest update tool.