RotAlign Touch Laser Shaft Alignment Tool

Interested?

Find out more…

RotAlign Touch – Advanced Laser Alignment Systems

RotAlign Touch delivers unrivaled precision and easy-of-use with cutting edge technology from the old pros in laser alignment, Prüftechnik.

  • Complete system: A single tool for standard alignments, advanced applications, and software analysis that provides maximum return on investment (ROI) for user
  • Complete system: A single tool for standard alignments, advanced applications, and software analysis that provides maximum return on investment (ROI) for users
  • Complete system: A single tool for standard alignments, advanced applications, and software analysis that provides maximum return on investment (ROI) for users
  • Complete system: A single tool for standard alignments, advanced applications, and software analysis that provides maximum return on investment (ROI) for users
Get Product Information
123123123

Technology

tech video

The sensALIGN Series technology is based on the inherent PRUFTECHNIK single-laser technology providing highly precise measurement results and easiest mounting and measuring in the field. sensALIGN 7 sensors include two HD large position-sensitive detectors (PSD) and MEMS inclinometers. Combined with the detector extension capability (InfiniRange), it is always possible to measure and document the initial alignment condition; no matter how big is the misalignment. Furthermore, this technology allows the simultaneous monitoring of the machine corrections in vertical and horizontal directions, starting from any angular position where the sensor comes to stop.

With sensALIGN 7, the door to the toughest alignment applications opens wide. Intelligent alignment features make it possible to approach complex alignments with serenity: intelliSWEEP filters out any poor measurement data due to difficult measuring conditions.

Whether it is a Cardan shaft, a vertical pump, or a turbomachine train, ROTALIGN touch will not let you down. All the best intelligent features are included: vertiSWEEP, Cardan Shaft, Live Trend, Live Move, Multicoupling Measure, Move, and Live Trend.

Watch our videos for laser shaft alignment with
ROTALIGN touch

  • ROTALIGN touch Robustness

  • Shaft Alignment with ROTALIGN touch

  • How to align a machine in only one Live Move

  • Cardan Shaft Alignment with ROTALIGN touch

  • Wind Turbine Generator Alignment with ROTALIGN touch

Download more information for free

  • PDF Icon

    How to safely align wind turbines with ROTALIGN and OPTALIGN - English
    Case Study

  • PDF Icon

    Gas Turbine Alignment with Rotalign Touch - English
    Case Study

  • PDF Icon

    Cardan shaft alignment on Unimog trucks with ROTALIGN - English
    Case Study

  • PDF Icon

    Drive train alignment on wind turbines with ROTALIGNd - English
    Case Study

  • PDF Icon

    How to save costs with precision shaft alignment - English
    Case Study

  • PDF Icon

    Counter machine shaft misalignment with alignment trend - English
    Case Study

  • PDF Icon

    Wind turbine alignment with OPTALIGN and ROTALIGN - English
    Case Study

  • PDF Icon

    Shaft alignment in smart factories with ROTALIGN touch - English
    Case Study

  • PDF Icon

    Gearbox alignment and assembly on a roller coaster - English
    Case Study

  • PDF Icon

    How to save costs with precision shaft alignment - English
    Case Study

What’s new?

touch device Firmware Version 2.5

  • ANSI tolerances available for Short flex and Spacer coupling types
  • Resolution available in both 2DP and 3DP (Metric)
  • Report print preview
  • Report new section: Measurement equipment serial number and due calibration date
  • Tolerance screen accessible directly from Results view
  • Context sensitive help ‘?’ button directly accessible within main workflow screens
  • “Add feet” button available in stationary machine properties

Please note: touch device firmware version 2.5 strictly requires ARC 4.0 software version 2.5 to communicate.

How to upgrade your firmware?

touch device – ALI 50.200 upgrade procedure

  • Please ensure the touch device is charged or has at least 50% battery capacity.
  • Unzip file to empty PRUFTECHNIK USB memory stick. Firmware is stored in “touch” folder.
  • Switch on the touch device. Wait for Home screen to appear.
  • Connect USB memory stick to the touch device USB port. New firmware copied from USB memory stick to the touch device.
  • After approximately 1 minute on-screen message box appears stating new upgrade firmware found. Tap green tick button to start upgrade. Remove USB memory stick from the touch device.
  • The touch device restarts and firmware upgrade begins.
  • After completion of firmware upgrade the touch device restarts and finishes in Home screen.

Device Viewer

The Device Viewer software is used to demonstrate the operation of the instrument on a PC or Laptop.

Software needed?

Voice App enables the voice-control of ROTALIGN touch

Via the PRUFTECHNIK ROTALIGN touch Voice App you can easily control the ROTALIGN touch laser-shaft- and machine-alignment system due to voice-control connected with your mobile phone or tablet-pc based on a Bluetooth connection. Thus you can fully concentrate on measuring and dictate the machine dimension directly into the device without even touching it. Measuring modes can be switched by voice control, too. The PRUFTECHNIK ROTALIGN Voice App amends the shaft alignment process and makes it more effective. You save time, your hands are free for the alignment process and in the end, you receive a precise, reliable, and repeatable alignment result.

What do our customers say?

“I enjoy the method of alignment with ROTALIGN touch. The product is perfect.”

Hendrik Petrus Broodryk, AESSEAL, Expat Rotating Equipment Technician & Mechanical Supervisor

“The ROTALIGN touch with its larger detector, move simulator and ease of use has made the alignments in the Test Cell that much easier. Given the use of turn buckles on the inboard end of the engine for adjustment, the ability in the ROTALIGN touch to show both vertical and horizontal adjustments live at the same time is essential.”

Darren Hall, TransCanada Turbines Ltd.

“The ROTALIGN touch with its larger detector, move simulator and ease of use has made the alignments in the Test Cell that much easier. Given the use of turn buckles on the inboard end of the engine for adjustment, the ability in the ROTALIGN touch to show both vertical and horizontal adjustments live at the same time is essential.”

Samir Beloul, Gas Sonatrach - Mechanical Technical Support Engineer

“The ROTALIGN touch with its larger detector, move simulator and ease of use has made the alignments in the Test Cell that much easier. Given the use of turn buckles on the inboard end of the engine for adjustment, the ability in the ROTALIGN touch to show both vertical and horizontal adjustments live at the same time is essential.”

Darren Hall, TransCanada Turbines Ltd.