Pruftechnik

Contact us

Please contact the PRUFTECHNIK team for any product or service inquiry.

Contact us

Find us locally

PRUFTECHNIK operates worldwide in over 70 countries.

Find your local contact person.

To your contact person
Singapore
PRUFTECHNIK S.E.A. Pte Ltd.
61 Alexandra Terrace #05-03 Harbour Link Complex
119936 Singapore
Singapore
  +65 6382 0 662
  moc.kinhcetfurp@eciffo
  1. Products and Services
  2. Condition Monitoring Systems
  3. Vibration Analysis and Balancing
  4. Vibration Analyzer
  5. VIBXPERT EX


VIBXPERT EX

Vibration analyzer and balancing tool for potentially explosive environments

VIBXPERT EX Vibration analysis and field balancing tool for use in potentially explosive areas

Approved for ATEX Zone 1

Intrinsically safe vibration analyzer and field balancer for vibration monitoring in explosion hazardous areas

Quick data acquisition with trending spectra

Short working time paired with highest efficiency

Rugged aluminum housing

Designed to withstand hardest conditions

Get a quote

Please fill out our contact form and we will send you a non-binding offer.

Get a quote

Register your NDT Product

Register your new Prüftechnik NDT Product and stay up-to-date with

Register

Schedule a free product demo

Please leave us a message and we will contact you to schedule a free product demo at your premises.

Free product demo

Intrinsically safe vibration analysis instrument and field balancer

  • Approved for ATEX Zone 1

  • Intuitive joystick operation (left- or right-handed)

  • Fast data acquisition with "trending spectra"

  • Robust aluminum housing

  • Compatible with VIBCODE transducer

  • Highest resolution for detailed frequency analysis

  • Interface to machine protection systems for further analysis

  • Vibration analysis and field balancing in ATEX Zone 1 with VIBXPERT EX by PRUFTECHNIK
  • vibration analysis of maritime assets with VIBXPERT EX by PRUFTECHNIK
  • Fan rotor field balancing
  • VIBXPERT EX vibration analyzer by PRUFTECHNIK

Interested?

Find out more …

Vibration analysis in explosive environments

VIBXPERT EX is a high-performance, intrinsically safe, fully-featured data collector, vibration analyzer and field balancer for easy condition monitoring and troubleshooting of rotating equipment in explosive environments such as petrochemical plants, refineries, offshore oil rigs, etc.

VIBXPERT EX collects field data including vibration information, bearing condition, inspection and process data and seamlessly integrates with the OMNITREND Center software platform for in-depth analysis.

The modular firmware structure allows you to upgrade the VIBXPERT EX from a route data collector to a full-blown troubleshooting device with advanced features such as coast down/run-up measurements, event recording, ODS & modal analysis and cross-channel phase measurement.

It is also possible to connect the VIBXPERT EX to protection systems via the buffered outputs. This enables you to perform additional analysis such as shaft vibration, shaft centerline plots or orbits e.g. on turbines, compressors and other turbomachinery.

As with all our data collectors and vibration analyzers, you will benefit from free software and firmware updates, and low ownership cost.

What's new?

VIBXPERT Firmware Version 2.33 build 810

General:

  • New firmware module 'E registration' provides route-based data collection, timewaveform and FFT analysis

  • Support for new processor and memory revision

  • Support of mainboard hardware status 14X and 15X

Route:

  • Reset status of measurement tasks to 'unmeasured'.

  • All measurement tasks below the current hierarchy level are set to "unmeasured".

  • Old results are retained and new results are added.

Coastdown:

  • Low pass filter can be activated. The filter frequency (1kHz or 10kHz) depends on the start and stop speeds.

  • When using time-synchronous averaging, the speed deviation is checked and the averaging

  • function is discontinued if the deviations become too large.

  • If the ESC button is pressed, a confirmation prompt appears to prevent the unintentional

  • discontinuation of measurement with the loss of data.

Phase measurement:

  • The reference edge of the trigger signal is now adjustable for phase calculation

  • The signal edge of either the incoming or outgoing trigger mark can be selected as the reference

Balancing:

  • Higher maximum input values for weight (500 kg) and radius (100m).

How to install the latest firmware update?

  • Download the VIBXPERT I firmware file on your PC.

  • Unpack the file and run the VIBXPERT Update tool. Please use the latest VIBXPERT UpdateTool.

  • Follow the instructions on the screen.

Need an update?

VIBXPERT smart tools

Notes

  • The VIBXPERT utility software is used for data transfer between the instrument and a PC.

  • The VIBXPERT Client software is used to demonstrate the operation of the VIBXPERT instrument on a PC or Laptop.