Pruftechnik

Contact us

Please contact the PRUFTECHNIK team for any product or service inquiry.

Contact us

Find us locally

PRUFTECHNIK operates worldwide in over 70 countries.

Find your local contact person.

To your contact person
Canada
PRUFTECHNIK Maintenance Technology Service Inc.
4406, Rue Louis-B.-Mayer
QC H7P 0G1 Laval
Canada


Fluke 820-2 LED Stroboscope

High-performance LED stroboscope tachometer

Fluke 820-2 LED Stroboscope

Up to 300,000 flashes/minute

Using 30 to 300,000 FPM, it can capture any rotational speed on rotating machines

Adjustable flash duration

A shortened flash duration has a positive effect on the image sharpness on fast rotating machines/shafts

Measuring without contact

No contact or reflector is required to measure the rotational speed

Get a quote

Please fill out our contact form and we will send you a non-binding offer.

Get a quote

Register your NDT Product

Register your new Prüftechnik NDT Product and stay up-to-date with

Register

Schedule a free product demo

Please leave us a message and we will contact you to schedule a free product demo at your premises.

Free product demo

An image per flash

  • Seven high-intensity LEDs with 4,800 lux at 6,000 FPM (30 cm distance)

  • Maximum flash frequencies thanks to LED solid-state light source with constant flash characteristics

  • Digital pulse width modulation for exceptionally sharp images even at very high rotational speeds

  • Suitable for industrial use - withstands a drop from one meter

  • No contact/no reflector tape to/on the rotating surface necessary

  • Adjustable flash duration

Interested?

Find out more

Product description

The Fluke 820-2 is a high-performance LED stroboscope tachometer. Using 30 to 300,000 FPM, it can capture any rotational speed on rotating machines. No physical contact is required between the stroboscope and the rotating surface. Likewise, there is no need for reflective tape, any existing mark (e.g., groove, screw, balance weight, etc.) is sufficient.

With its 30 to 300,000 FPM, every rotational speed can be set and captured, even on variable-speed machines. Belt slippage on belt-driven machines can also be detected, as well as belt speed.

Technology

The Fluke 820-2 LED strobe is more than just a tool to measure the rotational speed of machines without physical contact. It is also an excellent diagnostic tool for many applications:

  • Belt driven machines - fans in heating, ventilation and air conditioning systems, pumps

  • Ball bearings, shafts, gears or other machine parts

  • Clutches and gears

  • Foundations - Resonance vibrations

  • Wear or damage to cables or piping

  • Mixing and dosing processes

In addition, the stroboscope can be used as a stroboscope tachometer for rotational speed measurement instead of a laser tachometer. To use the stroboscope, the component to be measured must be visible. Likewise, there is no need for reflective tape, any existing mark (e.g., groove, screw, balance weight, etc.) is sufficient. A stroboscope tachometer is a helpful tool because you do not always have access to the machine shaft to glue on reflective tape to use a laser tachometer. Besides that, you cannot always make contact with the moving shaft to use a contact tachometer. With a stroboscope, you can measure the rotational speeds of shafts down to 30 FPM.